Replacing the fuel filter in car might look like a challenging task. However, with some easy steps to follow, you can easily replace your old fuel filter with a new one. Check out the things you will need and how to replace the fuel filter.

What Will You Need?

• New fuel filter
• Wrenches or pliers
• Clean rag
• Safety glasses
• Fuel line removal tool (optional)

Step 1: Locate the Fuel Filter

The fuel filter is typically located along the fuel line, either under the car or in the engine bay. Check your vehicle’s owner’s manual for the specific location of your fuel filter.

Step 2: Depressurize the Fuel System

Before you start replacing the fuel filter, you must relieve the pressure in the fuel system to prevent fuel from spraying out when you remove the old filter. To do this, locate the fuel pump fuse or relay in the fuse box and remove it. Then, start the engine and let it run until it stalls. This will depressurize the fuel system.

Step 3: Remove the Old Fuel Filter

Use a wrench or pliers to loosen the fittings on both sides of the fuel filter. Be prepared for fuel to leak out of the lines when you remove them, so have a rag handy to catch any spills. If you’re having trouble removing the fuel lines, you can use a fuel line removal tool to make the job easier.

Step 4: Install the New Fuel Filter

Install the new fuel filter in the same position as the old one. Make sure the arrow on the fuel filter points towards the engine, as this indicates the direction of fuel flow. Tighten the fittings on both sides of the fuel filter to secure it in place.

Step 5: Test for Leaks

Turn the ignition key to the “on” position, but do not start the engine. This will allow the fuel pump to pressurize the fuel system. Check for any leaks around the fuel filter and fittings. If you see any leaks, tighten the fittings until the leaks stop.

Step 6: Clean Up

Dispose of the old fuel filter properly and clean up any spilled fuel with a rag. Make sure you properly dispose of any used rags and other materials to avoid a fire hazard.

The post Step by Step Fuel Filter Replacement first appeared on Filtertech General Suppliers.

Choosing the right air filter for car is one of the most important factors for the car the function properly. If you pick an incorrect air filter, your car will start to cause you some trouble. Here, we will try to explore the air filters for cars and why choosing the right air filter is important.

What is an Air Filter?

Before we dive into the importance of an air filter in your car, let’s first understand what it is. An air filter is a component that sits between the engine and the air intake system, responsible for preventing dirt, debris, and other contaminants from entering the engine. It traps these particles and prevents them from damaging sensitive engine components, ensuring that only clean air flows through to the engine.

Why is an Air Filter Important?

Engine Performance

A dirty or clogged air filter can significantly impact your engine’s performance. The engine needs a constant flow of air to operate efficiently, and a dirty air filter can reduce the amount of air reaching the engine. This can cause your engine to work harder, resulting in reduced acceleration, reduced fuel efficiency, and even engine misfires.

Engine Health

Air filters play a crucial role in protecting your engine from harmful debris that can cause significant damage over time. Dirt, dust, and other contaminants can cause scratches on the cylinder walls, bearings, and other components, resulting in premature wear and tear. This can lead to costly repairs or even complete engine failure.

Air Quality

In addition to protecting your engine, air filters also help to improve the air quality inside your car. They prevent pollutants, allergens, and other harmful particles from entering your vehicle’s cabin, ensuring that you and your passengers breathe clean air.

When to Replace Your Air Filter?

Now that you understand why an air filter is important in your car, it’s essential to know when to replace it. Although the air filter clogging varies according to the environment in which it operates, the air filter should be changed every 30.000 – 35.000 Km for a passenger car, every 25.000 – 30.000 Km for a light commercial vehicle and every 20.000 Km for a heavy commercial vehicle. If you frequently drive in dusty or dirty environments, you may need to replace your air filter more often.

The post Why Air Filter is Important in Car? first appeared on Filtertech General Suppliers.

The kidneys in our bodies filter out the waste and remove excess fluid. The oil filter is also the most critical component of the lubrication system of the engine, which drains the oil from waste agents and impurities. These filters clean the oil to the vehicle engine.

The most common oil filters in today’s vehicles are a basic design. They are made in cylindrical steel body shape. Protection includes filter element and various parts (Figure 1).

Figure 1. Oil Filter Components

The filtration environment differs between different filters and brands.
When you want to remove or install these filters, you rotate the cover, which makes it easier to replace or inspect. A standard oil filter is not located in an exact position. Depending on the vehicle manufacturer, it may be above, below or near the cylinder block.

What Does An Oil Filter Do?

Engine oil lubricates all functional parts that move within the engine and helps cool the engine. As a result of combustion, the combustion waste particles, such as various dirt and sand, are mixed in the engine oil. They contaminate the oil and reduce the fluid of the oil. In this case, the oil cannot operate well and in particular the anti-corrosion protection function is reduced. As a result, engine performance is reduced and fuel consumption is increased. At worst, the vehicle engine will be damaged.

The function of the oil filter is to clean the oil that passes through it. The filter does this by locking in particles, so that the quality of the oil is better than the oil entering the filter. It helps reduce engine abrasion by removing any impurities in the oil. Engine life is significantly improved. It also performs efficiently.

Oil filters help increase the life of both the engine and the oil, reducing maintenance costs and providing optimum engine performance. It also minimizes the engine’s environmental impact.

How Does The Oil Filter Work?

When the engine of a vehicle is running, the oil pump pumps the oil from the oil sump to the filter. The oil enters the filter under pressure through the concentric openings at the top. From here, the oil flows into the filtration environment and then passes through the central tube through the filter and passes to the engine (Figure 2). Most filters use this oil filter flow direction. This oil circuit results in a clogged filter or thick (expired) oil which causes high pressure in the filter. In this case, the bypass valve located under the filter element opens and the engine is supplied with oil without filters. This ensures that the engine does not run oil-free at any time. In most cases, the by-pass valve is only temporarily opened and normal filtration continues when conditions allow it.

Figure 2. Oil Filter operating Principle

How Often is The Oil Filter Replaced?

Just like everything about the vehicle, your mileage will change depending on how often you change your oil. Frequency depends on a number of factors. Your vehicle age, road conditions, mileage and driving habits play a role in how often maintenance is required. If you frequently drive in harsh weather and road conditions, you plan more service stops no matter what. The oil change interval will be more frequent as the vehicle and engine are running more often.

The user manuals list “heavy driving conditions” as frequent trips less than 15 km, stop-and-go driving in extreme weather conditions, towing long-distance trailers and regular driving on broken, uneven or salty roads.

You must change the oil filter every time the oil is changed. Given the conditions mentioned above, oil and oil filter changes are generally made between 8000-12000 km or annually (for vehicles that make less than 10 km/year). However, it is best to consult the user manual for proper oil filter maintenance of your vehicle.

What Are The Symptoms Of The Expired Oil Filter?

A survey by the Car Care Council found that one in each of the four cars had a low engine oil level or dirty engine oil. If your vehicle is one of these, it may not work at peak performance, as your oil filter needs to be partially replaced.
Symptoms that require changing your oil and oil filter may include:

Metallic Sounds: An oil filter with an expired oil filter may cause the engine to remain oil-free, and when this happens, the metals in the engine interior will rub against each other. Metallic noises when the engine is running are a sign that there is a problem with the oil flow. Users who experience this type of noise must ensure that the vehicle is repaired as soon as possible before further damage is caused.

Oil Pressure drop: The oil pressure gauge can be read from the instrument panel of the vehicle. Noticing a sharp drop in oil pressure is a problem that needs to be checked. Under normal conditions, the engine oil pressure will not drop more than one percent while driving. Therefore, a severe pressure change is an error mark in the oil flow.

Dirty Exhaust Smoke: An expired oil filter causes black or dirty exhaust to escape from your car. There is a smell of burning oil from the exhaust. This is a sign of a bad filter that must be replaced as soon as possible before further damage occurs.

Dark oil: In the oil check available with the dipstick, if the oil color is too dark, the oil does not pass through a good filter. In this case, the oil filter and the oil must be changed.

How to select the oil Filter?

Because the oil filtration requirement of each car is unique, there is a question that users can ask.
What oil filter do I need?

Driving conditions depend on various factors, such as habits and climate. Dusty conditions require an oil filter that holds more dirt, but requires a first-class oil filter that can handle low-speed high load conditions. Extreme cold climates result in thickening the oil and you will need a filter that is sensitive enough to prevent the bypass valve engine from remaining oil-free.

Manufacturers need special filters for their engines and you need to consult your manual to provide the correct filter.

The post What is An Oil Filter? first appeared on Filtertech General Suppliers.